Reference: 0116
sold
2500 mm BHS Fosber MHI Marquip Corrugator
2500 mm BHS Fosber MHI Marquip Corrugator
Complete line to produce 3 and 5 ply corrugated cardboard
Drive side: right hand drive in paper going direction
Main components:
Single facer group 1:
Fosber Smart 400 Plus Single Facer (2014)
Design speed 400 m/min
Working width 2500 mm
Interchangeable casette type system
Inclined take-up conveyor
External Liner elevated preheater
Chiller system for Smart
Temperature control for Smart
Remote control panel for Smart
Corrugating rolls for Fosber Smart 400: Cassette Module E flute, Cassette Module C flute, Cassette Module D flute, 2 x Motorised Trolleys, Spare corrugating roll set C flute + bearing set.
5 BHS Reel Stands (1971, with disk breaks (2014) and BHS chucks (2017)
3 Fuma Splicers HIP BA 300 (2017)
2 Marquip Splicers M1 (1989)
Single facer group 2:
Mitsubishi 50C Single Facer (1984)
Design speed 250 m/min
Working width 2500 mm
Corrugating rolls B flute
Spare corrugating roll set B flute + bearing set
Spare pressure roll
Spare main motor and drive
Bridge
E+L Tension Master & Corr Aligner (BVW0325 + PFW 0323) (1999)
S&S Triple Stack Heater (1971)
Mitusbishi Glue unit 55C (1984)
2 x Interfic bar, Rockwell automation motor + drive upgrade (2017)
BHS Double Backer DWR (1992)
20 Cast Iron steam plates
Chaintrol
Mühlen & Sohn Aqua Pull felts (2017)
Mitsubishi Rotary Shear 66-1H (2016), Maximum cutting speed 150 m/min
Wellpacker Tear tape unit (1993), 2×3 tapers (6 – 12 mm tape)
E+L Slitter Liner (PNW02) (1991)
Mitsubishi Slitter scorer model 57H (2008)
Tandem unit, 6 box out, 2500 mm wide
Lower knife slitting (slitting from bottom into anvil roll)
Scorer rolls with chrome plates profiles
Motorised head carrier with indexing control (1 Motor per head)
Motorised scorer gap control
Automatic positioning of trim chutes
Vacuum paper dust removal device for slitting
Re-sharpening device for each slitter knife
Marquip Web diverter
Air filter system with automatic cleaning unit (2007)
Marquip Cut-Off Double knife 50L (1999) with Control System Upgrade
Universal Vacuum shingling conveyor (VSC) (2014)
Universal Duplex Stacker (1976 – 2014)
Downstacker 3200 mm, Downstacker 4900 mm. FPL conveyor upper + lower.
Corrsteam steam and condensate control system (2016)
Double backer steam settings down to 0.5 bar possible
Digital control system in control room
Metso IQ Moisturizer bar (2014)
Digital control system in control room. Water pressure pump. Ventilator
Outfeed conveyors: 19 m outfeed conveyors, Shuttle car
Mitsubishi Total Control System, model Sigma 2000 (2008)
3 x Wet End controller; 1 x Dry End controller; Bridge Level control; Splice Synchronisation
