2280 mm Voith Tissue Machine, Speed: up to 650 m/min, Capacity: up to 60 TPD

Reference: 5507

sold

2280 mm Voith Tissue Machine, Speed: up to 650 m/min, Capacity: up to 60 TPD

2280 mm Voith Tissue Machine, Speed: up to 650 m/min, Capacity: up to 60 TPD

2280 mm FOURDRINIER WET-CREPE TISSUE MACHINE

MAXIMUM SPEED 650 m/min, CREPE 5-15%, MAXIMUM PAPER WIDTH ON POPE 2280 mm. GSM Range produced: 22 – 55.

Capacity: up to 54 TPD at 41 GSM.

Features: DOUBLE PRESS, YANKEE WITH GAS HEATED HOOD and AFTER DRYER GROUP.

Major rebuilds and upgardes:

1986 – after dryer cylinders;

2006 – headbox installation overhauled by Voith;

2006 – new foils;

2016 – Yankee cylinder metallisation by Valmet.

Main components:

Stock pump with stuffing box and basis weight valve (BTG)

Primary cleaning low density stage 14 cones with pump. Secondary cleaning stage low density 1 cone with pump.

Headbox pump & First stage pump. Combined primary and secondary white water tank.

Primary screen: Finck 1978 Type: K100L P

Finck Vibrating Screen E 2/1.5

Voith Headbox (1983). Type: single layer air cushion. Slice width: 2350 mm. Flow: 5900 – 14000 l/min. Overhauled by Voith in 2003.

Foundrinier: wire width/length: 15850 / 2465 mm. Breast roll diameter/face: 545 / 2610 mm.

2 Foils with ceramic cover (1984). Trivac high vacuum box (2003). Wire to felt hydraulic controlled pick-up.

Vacuum system with separator tanks and extraction pumps (vacuum pump is excluded).

Press section: 2 presses. Suction press Voith (1981), 790 mm diameter, 2 vacuum zones, PU Cover, 70 kN/m nip load, hydraulic controlled. Grease lubrication. One spare shell.

Blind press: 509 mm diameter, 65 kN/m nip load, hydraulic controlled. Grease lubrication. One spare shell.

Felt cleaning station: HP – LP shower, oscillation hydraulic controlled.

Voith Yankee cylinder, cast iron plain inner surface. Diameter: 3100 mm, width: 3500 mm. Operating steam pressure: 5 bar maximum. Metallisation: Valmet Infinicote (2016).

Steam plant, Creping Station with ceramic blades.

Spooner Gas Hood (1971) with 2 burners, circulation fans.

Heat recovery system (1986) with steam heater, heat exchangers (glass tubes).

Broke pulper with conveyor.

Machine drives: Type: DC, manufacturers: BBC and ABB.

After dryer group: 6 dryer cylinders, diameter 1800 mm, width: 2500 mm. Hydraulic controlled guide rolls. 1 new spare dryer cylinder (2004).

Pope reel, hydraulic controlled. Slitting system with trim fan.

Machine control panel. Spare felts and wires.

Hydraulic station, lubrication system.